The range

Six lines, split the way stone is actually bought.

An importer does not order travertine. They order a format: calibrated tile for a floor contract, slab for a fabricator, split-face for a façade, a fabricated basin for a hotel bathroom. The range below is divided by format and by finish, because that is the axis a purchase order is written on — not by colour, which changes inside every one of these lines.

Honed & Filled Travertine Tile

The volume line. Calibrated modular tile in Ivory, Classic, Light Commercial and Country Classic, honed to a soft matt and filled with a colour-matched resin-cement blend. Sold in 30.5, 40.6, 45.7, 61 cm modular and 61 × free-length. This is the floor a distributor stocks and a contractor lays without thinking about it — which is exactly why the thickness tolerance is the specification that matters.

→

Formats: 30.5 – 61 cm modular
Thickness: 12 / 18 mm
Finish: Honed & filled
Tolerance: ± 1.0 mm

Tumbled Travertine Tile

The same stone, run through the tumbling drum until the edge softens and the pore stays open. Unfilled by default, which is the correct answer outdoors: an open pore drains, a resin-filled one traps water and lifts at the first frost cycle. Supplied in Light, Standard, Classic Mix, Country Classic (Scabas), Walnut and Commercial. Frost tested to 48 cycles under EN 12371.

→

Formats: 10 × 10 – 40.6 cm
Thickness: 12 / 15 mm
Finish: Tumbled, unfilled
Frost: 48 cycles, EN 12371

Travertine Slab — Vein & Cross Cut

Gang-sawn slab up to 300 × 190 cm in 2 and 3 cm, in both cut orientations, shipped on A-frames in cut sequence with the block number on the bundle. Vein cut for architectural wall and continuous banding, cross cut for the classic flowered face. Bookmatched pairs are kept together; we will not break a sequence to fill a container.

→

Size: up to 300 × 190 cm
Thickness: 2 / 3 cm
Cut: Vein / cross
Sequence: Block-numbered

Marble & Onyx Slab

The lines an importer needs alongside travertine to close a project: Cappuccino Forest, Bianco Lasa, Fantastic Onyx, Pietra Grey, Spanish Dark and Bronzetto, polished or honed. These come from partner quarries, not ours, and we say so — a supplier who claims to quarry fourteen materials in one district is describing a warehouse, not a quarry.

→

Materials: 14 in stock
Thickness: 2 / 3 cm
Finish: Polished / honed
Source: Partner quarries

Split-Face & Mosaic Panels

Hand-split travertine strips set on fibre mesh at 30.5 × 30.5 cm, plus the flat mosaic, border and medallion range. The split face is broken, not sawn, so the relief is the stone's own fracture and no two panels repeat. Depth runs 15 to 30 mm; specify the sheltered-exterior build if it is going on a façade, because mesh backing and freeze-thaw do not agree.

→

Panel: 30.5 × 30.5 cm
Relief: 15 – 30 mm
Backing: Fibre mesh
Range: Mosaic · border · medallion

Sinks, Basins & Shower Trays

Turned and hollowed from a single block — not assembled from panels, which is the difference you find out about when a glued corner weeps. Vessel and undermount basins, farmhouse sinks and one-piece shower trays in honed or tumbled finish, minimum 25 mm wall. Made to drawing for hotel and residential projects; this is the line that carries the margin.

→

Body: Single block
Wall: 25 mm min.
Finish: Honed / tumbled
Lead time: 21 days

Travertine medallion, cut and assembled to drawing

Send the schedule. We will send the stow plan.

Tell us the formats, the finish, the square metres and the discharge port. You get a unit price, a container loading plan and a date we will hold — usually within two working days.

Request a quotation